PM7 Leaking Help
+3
Devon
trum_15
A.Perry#21
7 posters
PM7 Leaking Help
Hey guys,
I got the PM7 in yesterday, and it seems to be leaking from the LPR, I am going to try and adjust the LPR when i get some air (used what i had to figure out the leak).....and i can get it to shoot, but it just doesn't sound right (leaking wise).
If anyone can help me out that would be great....
I got the PM7 in yesterday, and it seems to be leaking from the LPR, I am going to try and adjust the LPR when i get some air (used what i had to figure out the leak).....and i can get it to shoot, but it just doesn't sound right (leaking wise).
If anyone can help me out that would be great....
Re: PM7 Leaking Help
heres what i did when my pm6 leaked from the lpr.. i took the reg off and replaced the o-ring, then screwed in the lpr and that fixed it.
trum_15- Forum Prodigy
- Posts : 3635
Join date : 2009-10-22
Location : Portland
Re: PM7 Leaking Help
I would turn it all the way down(with no air) then air it up and turn it up until its set right. It might just need to be reset.
Devon- Forum Prodigy
- Posts : 1619
Join date : 2009-11-15
Location : Gorham
Re: PM7 Leaking Help
Devon wrote:I would turn it all the way down(with no air) then air it up and turn it up until its set right. It might just need to be reset.
Make sure you turn it all the way down WITH NO AIR like Devon said.
Re: PM7 Leaking Help
ya, that's what i started doing... but i ran out of air.... the leak, started to go away, but ran out of air to finish......
Re: PM7 Leaking Help
It probably only started to go away because you were running out of pressure. Make sure you hit that guy with neg.
Re: PM7 Leaking Help
Ya...Turn the LPR all the way in before airing up. Then back out 3-4 full turns. I ran all four of my PM7's and every other DM / PM I had at 3 to 4 turns out. Never more, never less.
If leak persists, replace / relube outer o-rings on the LPR and then check the Piston O-ring itself. Replace if needed.
IF leak persists, replace outer orings on the top hat and can. Just trust me on that.
If leak persists, replace / relube outer o-rings on the LPR and then check the Piston O-ring itself. Replace if needed.
IF leak persists, replace outer orings on the top hat and can. Just trust me on that.
Stanks- Forum Prodigy
- Posts : 794
Join date : 2009-07-21
Location : New Hampshire / Castine, ME
Re: PM7 Leaking Help
Could also be the reg seat.
Devon- Forum Prodigy
- Posts : 1619
Join date : 2009-11-15
Location : Gorham
Re: PM7 Leaking Help
Yep. Check the reg seat and adjuster o-ring.
Stanks- Forum Prodigy
- Posts : 794
Join date : 2009-07-21
Location : New Hampshire / Castine, ME
Re: PM7 Leaking Help
I put the lpr all the way in with no air
short207- Supporting Member
- Posts : 1746
Join date : 2009-08-09
Location : mt.vernon
Re: PM7 Leaking Help
i think he traded this for a Ego7..
trum_15- Forum Prodigy
- Posts : 3635
Join date : 2009-10-22
Location : Portland
Re: PM7 Leaking Help
haha, you gun whore.
trum_15- Forum Prodigy
- Posts : 3635
Join date : 2009-10-22
Location : Portland
Re: PM7 Leaking Help
can we keep this thread serious?
short207- Supporting Member
- Posts : 1746
Join date : 2009-08-09
Location : mt.vernon
Permissions in this forum:
You cannot reply to topics in this forum
|
|